Fix Error Code 80004001: Bluescreen on Windows 10 Burnout Is Real. Here’s How to solve It.

Windows 10 error code 80004001 is a peculiar error among the other errors of Windows’s operating system. When the error occurs, it seems to be a real burnout. You are here due to suffering the problem right now. But you are not alone in experiencing such an error. An overwhelming majority of windows OS users also have a bothersome experience like you. Without the proper knowledge, it is difficult to wipe out the windows error 80004001 most of the time. Today, I am here to assist you in fixing the error in the right way and like an expert. I am proving the available method, which will bring your windows back in a typical, smooth, and well-performing windows operating system.

What defines the error 80004001 Or What Is windows 10 error code 80004001?

The error code 80004001 is an internal Windows 10 operating system configuration error. Some components of the device Windows operating system can’t configure properly. For this reason, a computer can start or boot normally. A perfect arrangement is essential for booting up the computer. But in this situation, the configuration is not available. The problem suddenly occurs after an update or any changes made to the Windows OS. A message shows like “There was a problem” restart your PC to try again. But after restarting the PC, a bluescreen appeared. And you got a message like this “it looks like something didn’t load correctly.” This loading refers to the configuration loading of the computer. In addition to this, sometimes it provides an error code for checking online solutions. And it says Error code: 800004001.

windows 10 error code 80004001
windows 10 error code 80004001

What Are The Possible Causes Of The windows 10 error code 80004001?

It helps fix any issue if we can know the causes of the problem. So, here we will describe some possible reasons for the error code 80004001.

Presence Of Virus, Malware, And Ransomware:

In our daily computer usage, we perform many tasks. In this period, various destructive wrong software files may enter the system. These harmful elements can damage, change, or even delete many valuable files in the operating system. And for this, the blue screen error codes appear.

Incorrect, Damaged, Or Obsolete Driver:

Drivers play an essential role in the smooth and stable running of the computer and an operating system. The windows 10 error code 80004001 occurs when one or more drivers are backdated, damaged, or even mismatched.

Corrupt file:

There are numerous files run in the windows operating system. They have a specific role and identification of every individual file. Its extension also categorizes the files. Among them, Exe, DLL, VDX, BAT is popular. When any system file is damaged, changed, or corrupt, the error code 80004001 windows 10 occurs during the computer’s boot-up.

Incorrect input or change in registry file:

A registry in windows is nothing but an internal database. The registry allows the system, configuration, and applications to load and run. Notably, it’s allowed the system and applications to run both individual and global when it starts and log in. Many times, changing the registry may lead to a problem. And this change may happen by the user, or even third-party software may change it. And it is a vital cause of windows 10 error code 80004001 while booting.

Change Or Corruption In System File:

The system file is vitally necessary to run and perform the operating system. There is nothing to do with the user of the system. And for this, it always keeps hidden. But sometimes, users can move this file to a different location mistakenly. In addition, it may be corrupt or damaged for various reasons. For this, the error code 80004001 windows 10 occur, and we can’t start the computer.

All above is the possible reason for the error code 80004001 windows 10. But there may be any other reason behind the issue. But whatever the reason is, we must fix it. And let’s dive into the fixation right now.

How To Fix Windows 10 error code 80004001?

After knowing the possible reason now, it’s time to fix the error 80004001. So, here I am describing all possible fixes that can get rid of the error. You don’t need to apply them all at a time. You must use one method at a time and check for the erase of the error. If you find the error wiped out, then leave. If it’s not worked, then apply the following available method. Be calm and do as show here. It will bring you out from the counterintuitive issue of the blue screen error codes. So, let’s begin.

1. Pre-requisition before fixation:

The error code 80004001 is not like other errors of Windows. For this, we must take some extra measures to fix it. Due to being unable to boot-up up the computer, we can perform the task. So, first, we have to start our computer. In this regard, the necessity of a prerequisite occurs.

Start or run your PC To safe mode.

To apply the method, you need to start your computer, but for error, you can’t do it. So, an alternative way to start a computer with the error in safe mode. Do as I say below to run your computer in safe mode.

i) Create Windows 10 installation media by downloading it from the Microsoft Official Website. Follow the steps below.
    • Go To On A Working Computer With Internet.
    • Download The Windows 10 Installation Media.
    • Select a language, edition, and architecture (64-bit or 32-bit).
    • Copy It To A Flush Or DVD Drive.
ii) Go To Your Bios Setting And Change The Boot Up Location To DVD Or Flush Drive.
    • Power On Your Computer
    • Press (Immediately) Dell Or F10/F8/F2/F12 Depending on Your Device.
    • Now You Are In Bios Settings.
    • Here Select The Booting Options Location (If it is in DVD, it’s ok, but change it to USB drive if you want to use USB Drive).
    • Now Choose the language and keyboard layout you prefer and click On ok Or Next.
    • After That Select Troubleshoot Option.
    • From The Given 5 Option Chose Command Prompt.
    • After Entering Command Prompt Copy And Paste The Following Command And Press Enter.

bcdedit /set {default} safeboot minimal

  • Close The Command Prompt And Select Continue To The Next Screen.
  • Now it will start your Pc In a safe Mood.

[CAUTION:

Using this method will start your computer in safe mode every time you turn on your computer, after finishing the error fixing methods and fixing the error. You must disable the safe mode in the start-up option. For disabling the start-up in safe mode, apply the process again and use the following command in the command prompt.

bcdedit /deletevalue

{default} safeboot.]

After booting up your Pc in safe mode, you must now diagnose what the problem is preventing your computer from usually starting. And for doing the same, follow the instruction below.

Download Media Creation Tool
Now Copy The Media Creation Tool To A DVD Or Pen Drive.
Now Copy The Media Creation Tool To A DVD Or Pen Drive.
Choose-the-language-and-keyboard-layout.
Choose-the-language-and-keyboard-layout.
Select-Repair-Your-Computer
Select-Repair-Your-Computer
Choose The Option Of Troubleshoot.
Choose The Option Of Troubleshoot.
On the Advanced options screen, click Command Prompt
On the Advanced options screen, click Command Prompt
Type the command And Press Enter
Type the command And Press Enter
After Closing Command Prompt Now Choose to Continue on the next Screen.
After Closing Command Prompt Now Choose to Continue on the next Screen.
Windows Boot Manger
Windows Boot Manger

2. Turn Off Your Antivirus Apps:

Antivirus is helpful for our computer’s safety and security. But sometimes it may cause the various problem. Some antivirus sets it up with registry files of windows and the boot sector. And it will hamper the expected performance of the Operating system. So by disabling the antivirus may solve your existing windows 10 error code 80004001 problems. To do the same, apply the following steps.

  • First, Open Your Antivirus Program Right Clicking On The Icon In Taskbar.
  • Click On Manage Antivirus.
  • Now Click On Setting And From Here Go To Pc Protection.
  • After That, Click On Disable.
  • Finally, Click On Apply And Ok.
  • Exit From The App.

After disabling the antivirus, restart your Pc and look for the problem. If it is solved, then uninstall the antivirus for now. And next time, find a better one for the security issue of your device.

Open Your Antivirus Program And Click On Mange It.
Open Your Antivirus Program And Click On Mange It.
Go To Setting And Click On Disable.
Go To Setting And Click On Disable.
 Finally Click On Apply After That Ok.
Finally Click On Apply After That Ok.

3. Check And Fixed Driver Problem.

As we initially know, drivers are essential components of an operating system. But sometimes, it may corrupt, damaged, or even be backdated. So, check for the driver’s functionality and efficiency. If you find something unusual, then fix it right now. For preventing and resolving the driver’s problem, follow the steps below.

    • Go To Device Manager By Right Clicking On Windows Icon (Left In Taskbar)
    • Find The Required Driver Update If Any.
    • If Driver Installation Required Then Install The Driver From The Manufacturer Website.
    • After That Right Click On Required Drivers Component.
    • And Click On Update Driver.
    • Now select Browse My Computer For Drivers.
    • Select The Downloaded Driver From Device Location And Click ok.

After updating the driver problem, restart your computer in normal mode and check if the error exists or not. If the error remains unchanged, then try the following method.

Checking For The Driver Status.
Checking For The Driver Status.
Now Right Click On The Required Driver's Item And Click On Update Driver
Now Right Click On The Required Driver’s Item And Click On Update Driver
After That Click On Browse My Computer For Drivers.
After That Click On Browse My Computer For Drivers.

4. Update latest windows version.

The operating system requires updates in our regular computer use with Windows OS. However, it may fail for a variety of reasons. However, it is necessary to upgrade the operating system for the computer to work well. It also contributes to the cure of malfunction by introducing new features. We may add a new feature to an existing operating system by simply updating it, which helps us ensure our devices’ security. We can’t ignore the fact that Microsoft releases updates regularly.

Today’s windows 10 error code 80004001 may result from not updating the windows in its latest version. It is essential to update windows now. For updating, windows follow the step given below.

    • Go To Settings By Right Clicking On Windows Icon At Left down Corner of Taskbar.
    • Now Click On Update & Security.
    • Again, Click On Windows Update.
    • After That, Click On Check For Updates.
    • If Update Require, Then Click On Update.

After updating your Windows, check for the error dissolved or not. If not, then follow the following method.

Going To Setting For Updating Windows.
Going To Setting For Updating Windows.
Click On Update & Security.
Click On Update & Security.
Click On Windows Update And Again Click On Check For Updates.
Click On Windows Update And Again Click On Check For Updates.

5. Delete recent updates files.

The error code 80004001 windows 10 also may occur due to an update that you tried most recently. In this case, the operating system does not update ideally. And cannot remove the update by itself. So, most of the time, deleting the last update that causes the error will eliminate the problem. Do the following for deleting the previous updates, which may be responsible for the error code 80004001 windows 10.

    • Right Click On Windows Icon Of Taskbar And Go To Setting.
    • Now Click On Update & Security.
    • Click On Windows Update.
    • Click On View Update History
    • After That, Click On Uninstall Updates.
    • Right, Click On It And Click On Uninstall.
    • Now Select Your Last Updates And Click On Uninstall.

Going To Setting.

Going To Setting.

Click On Update And Security.
Click On Update And Security.
Clicking On View Update History.
Clicking On View Update History.
Click On Uninstall Updates.
Click On Uninstall Updates.
Select Your Last Updates And Click On Uninstall.
Select Your Last Updates And Click On Uninstall.

Other things to do for clearing the update cache of the windows updates.

    • Type Run On Taskbar And Press Enter.
    • Now Type “services.MSC” and press Enter.
    • Locate Windows Update From The List.
    • Right, Click On It.
    • Select Stop.
    • Again, Type Run On Taskbar And Press Enter.
    • Now Type “C:\Windows\SoftwareDistribution\
    • Open Download Folder
    • Select All and Click On Delete.

After deleting the update from your computer, restart your computer normally and look for the problem. It Is gone, that’s great. Otherwise, apply the following method.

Run The Command service
Run The Command service
Find Our Windows Update And Stop It.
Find Our Windows Update And Stop It.
Going To Software Distribution Folder And Selecting Download Folder.
Going To Software Distribution Folder And Selecting Download Folder.
Deleting All Download Files.
Deleting All Download Files.

6. Run The System File Checker.

As we know, the corruption, malfunction, and or damages of system files may cause the error code 80004001 windows 10. So, we must check it now and if it finds any anomalies, let’s fix it. A system file checker, SFC is a built-in program in Windows 10. And it will allow you to check and correct any error found in the system file. Follow the steps below to run the system file checker (SFC).

  • Open Your Command Prompt and Run As Administrator.
  • Click On Yes To Give The Permission.
  • Now Type The Following Command On The Command Prompt.

Sfc/scannow.

  • After completing the process by 100%, Close The Command Prompt.

It will take some time and after analyzing all your system files. It will solve the windows 10 error code 80004001 while booting. If the error remains unchanged, then follow the following method.

Open Command Prompt And Run As Administrator.
Open Command Prompt And Run As Administrator.
Running SFC Command On Command Prompt.
Running SFC Command On Command Prompt.
Completing The SFC Command And Finding The Problem.
Completing The SFC Command And Finding The Problem.

7. Restore the system file.

The system file comes with the operating system. And without a system file computer can’t be run and operate correctly. But due to various reasons, this system file can be corrupted. Especially, a virus can be corrupt it. On the other hand, a bad sector on a hard drive may also cause corruption. And if the existing error occurs due to the system file corruption. After repairing it can fix windows 10 error code 80004001. For to do the same, follow the steps below.

    • Type Control Panel On Search Box Of The Taskbar.
    • Click On Open.
    • Now Click On Recovery.
    • After That, Click On Open System Restore.
    • Here Click On Choose A Different Restore Point And Click On Next.
    • Again, Select The Last Windows Install And Click On Next.
    • And From New Dialogue Box Click Finish.

When you finish the system file restoring, now look at whether your bluescreen error code exists or not. If it is not solved, then apply the following method.

Opening The Control Panel.
Opening The Control Panel.
Clicking On Recovery.
Clicking On Recovery.
Click On Open System Restore
Click On Open System Restore
Click On Choose A Different Restore Point And Click On Next.
Click On Choose A Different Restore Point And Click On Next.
Select The Last Windows Install And Click On Next.
Select The Last Windows Install And Click On Next.
Finally Click On Finish.
Finally Click On Finish.

8. Recreate Boot Configuration data.

Booting the configuration data of the boot sector is essential to keep the information of the operating system. Along with this, BCD also identifies where is the operating system file located. Due to various reasons, the essential BCD (boot configuration data) may be corrupt or damaged. In some cases, users may completely delete it. If we recreate the data to its original form, then the problem of the blue screen error codes will dissolve. Do the following to fix the issue.

Go To Command Prompt As Going To Safe Mode.

    • Now Copy And Paste The Command From Following And Press Enter (put one command at a single time).
    • Run The Commands to Repair BIOS Based System BCD:

 bootrec /fixmbr

 bootrec /fixboot

 bootrec /scans

 bootrec /rebuildbcd

Run The Commands to Delete & Recreate BIOS based System BCD:

ren c:\boot\bcd bcd.old

bootrec /rebuildbcd

After completing the command, exit from the command prompt. Turn off your computer. And start your computer usually.

Commands to Repair BIOS Based System BCD
Commands to Repair BIOS Based System BCD
Commands to Delete & Recreate BIOS based System BCD
Commands to Delete & Recreate BIOS based System BCD

9. Use a windows repair tool To Fix Windows 10 Error Code 80004001.

In the windows 10 operating system, there is a built-in repair tool. It will allow you to fix the issue you are facing right now. In addition to this, plenty of third-party repair tools is also available. Some are free, but most of them paid. But keep in mind that some third-party tools may not be suitable. It can make the problem more complicated. But you can use windows built-in repair tool without any hesitation. The chances are enormous that it can solve the existing error code 80004001 windows 10. To perform the task, follow the steps below.

    • Go To Setting By Right Clicking On Windows Icon.
    • Now Click On Troubleshoot From The Left.
    • Again, Click On Additional Troubleshooter.
    • Finally, Click On Windows Update Option.

After running windows troubleshooter, look for the error code 80004001 windows 10 erased or not. If not, then follow the subsequent fixation.

 Go To Settings For Run Windows Repair Tool.
Go To Settings For Run Windows Repair Tool.
Click On Update & Security.
Click On Update & Security.
Now Click On Troubleshoot And After That Additional Troubleshooter.
Now Click On Troubleshoot And After That Additional Troubleshooter.
Finally Click On Windows Update.
Finally Click On Windows Update.

10. Going Back To Previous Version Of Windows.

Suppose you update your windows version to Windows 10 from another older version. And the problem arises after updating the Windows operating system version. Then going back to the previous version will eliminate the existing problem of windows 10 error code 80004001 while booting. And to go back to the earlier version of windows, do the following.

    • Run your Pc In Safe Mode.
    • Go To Setting And Click On Update & Security.
    • Now Click On Recovery From The Left.
    • After That, Click On Get Started.
    • Click On Go back to the previous version of Windows 10.

[NB: You can perform the task within 10 days of changing the Windows version. Take a backup of the essential things from your C drive.]

After going to the previous version of the windows, if the problem solves well and well, if the issue remains unchanged, follow the last fixation method below.

Go To Setting By Right Click On Windows Icon At Taskbar.
Go To Setting By Right Click On Windows Icon At Taskbar.
Click On Update & Security.
Click On Update & Security.
Now Click On Recovery At Left Side After That, Click On Get Started.
Now Click On Recovery At Left Side After That, Click On Get Started.

11. Reset The Pc And Fix Windows 10 Error Code 80004001.

After implementing all the above-said methods, if you find your problem of windows 10 error code 80004001 does not wiped-out, then you must reset the Pc. Resetting the pc will bring your computer back to like a newly installed Windows operating system. And you may need to install your drivers again. By resetting your pc, you can delete everything, or you can keep your files. But if you keep your file, it will not bring you the fix the existing error. So, to get the best result, you should go with the remove everything option. For resetting your computer, follows the steps below.

    • Run your Pc In Safe Mode.
    • Go To Setting And Click On Update & Security.
    • Now Click On Recovery From The Left.
    • After That, Click On Get Started Under Reset this Pc Option.
    • Select Remove Everything Option And Proceed With The Screen Command.

It will take a little bit more time to complete the procedure. After completing the process restart your computer in normal boot. And you will see your windows 10 error code 80004001 while booting disappeared.

Select Recover From The Left And Click On Get Started.
Select Recover From The Left And Click On Get Started.
Remove Everything.
Remove Everything.

Final Thoughts.

windows 10 error code 80004001 fixation is a difficult task for an average computer user. But if you have the patience and intention to fix it, you can do it by following the above-said method. Any Pc technician will perform such a fixing method if you do not have enough time to go for a technician or want to learn it. Then the above said information will fulfill your expectation.

Last but not least, if you find this article helpful, don’t hesitate to share it with your nearest and dearest ones. If you have any queries, questions, and suggestions regarding today’s topic of fixing the windows 10 error code 80004001, let us know by commenting below.

Good Luck!

Recommended Reading : How to fix “you need permission to perform this action windows 10”. – The Quickest and easiest way.

Frequently Asked Questions.

Leave a Comment